Pressure Bearings

electric vehicles bring convenience to people's travel and are loved by people. The dexterity of turning in the direction of electric vehicles depends on the quality of the front fork and the pressure bearing. The uncertain direction of turning will cause accidents, and the front fork is also prone to injuries and problems. Repair quickly.

pressure bearing is broken, the cover plate wire is biased or too tight, it will cause inflexible turning, steering difficulty and deviation, and if it is not repaired in time, it will cause the front fork to wear out and cause riding danger!

, let's introduce the personal experience and skills of changing pressure bearings. I hope to point out the correction and make common progress!

1. Spray rust remover on the screws to be disassembled first to facilitate disassembly, save time and effort and do not damage the wires.

2. The front wire and brake wire may cause inconvenience in disassembly. Unplug connectors to avoid trouble caused by forced disassembly.

3. Do not twist the screws with brute force. In case of difficult screws, twist them "back and forth", otherwise the front fork screw pattern will be easily broken.

4. It is wrong to change the steel ball without changing the bowl, and the wear of the bowl cannot be ignored. Some of them do not change the bowl, and the uneven (bowl) will cause the steel ball to run hard and easily.

tip: Prepare a slender steel bar. The bottom bowl is knocked from top to bottom, and the top bowl is knocked from bottom to top. It is easy to come down.

5. Do not use a hammer to hit the bowl.

tip: Use a small square of wood to make the bowl in place.

6. Apply lubricating oil. The friction of lubricating steel balls without lubricating oil increases and will not be durable. The upper and lower steel balls will allow sufficient oil.

7. The upper cover wire should be moderate, not too loose or too tight, not clang block is appropriate, the upper fixed wire must be tightened to avoid loose wire, causing the handlebar to move and the front fork to move.

8. Arrange the wires and fix them with wire harnesses so as not to hinder the steering.

the steering in front of the electric car is the steering direction. The direction cannot be controlled, and it is necessary to hit the frame. It is better to repair it in time to protect others, protect yourself, "turn" to others, and "start to" happiness......